Function Of Quality Control Department In Garment Manufacturing

  • Share
Quality control department:

Quality agency customer needs is to be satisfied just maintaining an adequate criterion of quality besides costs try. There are a issue of factors on which quality fitness of garment industry is based such every bit – operation, reliability, durability, visual too perceived lineament of the garment. Quality needs to live defined inwards price of a item framework of cost. As producers of apparel in that location must live a constant endeavor to produce work of good character.
 means customer needs is to be satisfied but maintaining an adequate standard of quality a Function of Quality Control Department in Garment Manufacturing
Figure one- Quality inspector checking garments

Process catamenia nautical chart of character section:

 means customer needs is to be satisfied but maintaining an adequate standard of quality a Function of Quality Control Department in Garment Manufacturing
Figure 2- Working menstruum nautical chart of lineament section

Working procedure of quality command section inward clothes industry:

Fabric Inspection in addition to QC Procedures: Incoming fabrics are inspected at JC Penney’sec recommended four Point system. 100% textile is inspected past textile QC’sec. Each fault is given points keeping in persuasion the nature as well as intensity of the faults. xl Points are allowed in 100 inspected yards. If number of faults/points exceeded than twoscore per 100 G, the material curl is rejected. Lab exam reports are as well taken from fabric suppliers too verified through internal together with third political party labs randomly.

Accessories Inspection: Accessories at the time of receipt in store are randomly inspected by QC’s/concerned persons at least upward to 10% of the received quantity.

Cut Parts Inspection: 100% cutting parts are inspected before input to sewing. The rejected components are replaced from remnants or removed. Cut parts are too inspected 100% before sending as well as later on receipt from printing together with/or embroidery.

Sewing Inline Inspection: During stitching operations, the inspections are done on JC Penney’second recommended vii-0 System. Inline QC inspects 7 pieces randomly for each motorcar operator twice a twenty-four hour period. If he finds any error among these 7 inspected pcs, the Sewing operator has to inspect the whole bundle himself too offer inspection once again to Inline QC. If the inspection is mistake costless, and so this sewing operator volition undergo follow upward inspection of 03 Consecutive bundles. If 03 Follow up Inspections are ok, the Inline QC moves to side by side machine operator. Follow upwardly inspection, the Inline QC finds whatever error, so the said sewing operator has to go nether 2nd follow up inspection. If the 2nd follow up fails so operator has to terminate the go for 2 decisions to be made depending on the nature of the faults (either automobile to get under maintenance or sewing operator to get for preparation or replacement).

Sewing End Line Inspection: 100 % garments are checked on sewing related faults later on sewing completion. Both in and out sides of the garments are inspected.

Use of Auto Trimmer & Thread Sucking Machines: We are using Auto Trimmers for clipping to avoid un-necessary clipping cuts during this process. We are as well using thread sucker machines to ensure that packed garments are costless from liberate threads.

Final QC Inspection: Garments are checked 100% on character subsequently pressing for fabrication, finishing, appearance, sewing, shading, labeling etc. to make certain that quality garments are packed into cartons.

Measurement Specs Control: Before packing, garments are 100% checked on measurements for primal mensuration points.

Internal Q.C Lab & Third Party Testing: Fabrics in addition to garments are randomly tested at internal QC lab on fabrics’ basic functioning features like material weight, shrinkage, torqueing, colour fastness, PH Value etc. In improver to this, garments are sent to tertiary party labs (SGS, ITS, BV) for independent testing to brand certain that the outgoing goods are meeting client’s required character standards.

 

About Author:
Mohammad Sajjadul Karim Bhuiyan
BGMEA University of Fashion too Technology
Email: [email protected]

You can likewise similar:

  1. Quality Control inwards Apparel Industry
  2. Quality Management System inwards Apparel Industry
  3. Quality Assurance System inward Apparel Industry
  4. Quality Control Plan inward Apparel Industry alongside Template
  5. Section Wise Quality Control inwards Garment Factory
  6. Inline Quality Inspection Process inwards Apparel Industry
  7. Quality Control of Cutting Room inwards Apparel Industry
  8. Garment Quality Control Policy for Cutting and Finishing Section
  9. How to Maintain Garments Quality inward Apparel Industry

  • Share